For Wood

Features

1. FAST CUTTING& TRIMMING-TCT saw blade is compatible to use with grinding tools of variours top brands. It is manufactured for fast cutting and trimming softwood and hardwood. 

2. PREMIUM TUNGSTEN CARBIDE-The tungsten carbide tips are weleded one by one to the tips of each blade in a fully automated manufacturing process. 

3. LASER-CUT BODY-Top laser cutting machine make reduce-noise slots. Make sure each blade has its long life.


Part NO.OdKerfPlateBoreTeeth
M08Z040CG8"0.126"0.087"5/8"40T
M10Z060CC10"0.126"0.087"5/8"60T
M12Z072CC12"0.126"0.087"1"72T
M14Z084HB14"0.169"0.118"1"84T
M16Z096CC16"0.150"0.110"1"96T
M18Z108CC18"0.157"0.118"1"108T


Multi-Under Cut Saw Blade

Features

1. Saw blade  is 5-1/2'' diameter.  

2. The 36Teeth undercut an inside corner area. For cutting wood base, moldings, door jambs, and drywall only.

Part NO.OdKerfPlateBoreTeeth
M05Z036MC14021.622.236


Multi-Under Cut Saw Blade

Features

1. Saw blade is6-1/2'' diameter.

2. The 40 Teeth is great for use in undercutting wood doors, wood jambs, wood base or drywall only. 


Part NO.OdKerfPlateBoreTeeth
M06Z040MC17021.622.240


General Wood, Plywood, Board

Features

1. For Fast, Smooth, Heavy- Duty Rip Cuts on Soft/ Hardwood. 

2. To be used on radial arm saws, miter saws , table and special saws.  

3. Micrograin carbide teeth to last longer and deliver smooth cuts .


Part NO.OdKerfPlateBoreTeeth
NX10D04010''(255mm)2.61.81''40/60/80
NX12D06012''(305mm)321''60/80
NX14D10014''(355mm)3.22.251''100/120
NX16D10016''(405mm)3.42.41''100/120
NX18D10018''(455mm)3.62.61''60/80/100/120
NX20D12020''(505mm)3.82.81''60/80/100/120


Rip Cutting Saw Blades

Features

1. For rip and crosscuts. 

2. The large gullets allow deep cuts and effective chip clearance.

3. Micrograin carbide teeth to last longer and deliver smooth cuts. 


Part NO.OdKerfPlateBoreTeeth
NX07JZ0487''(180mm)2.21.51''48/52
NX08JZ0488''(200mm)2.21.51''48/60
NX09JZ0609''(230mm)2.61.81''48/60
NX10JZ05210''(250mm)321''52/60/80
NX12JZ08012''(305mm)321''80/100/120
NX14JZ08014''(355mm)3.22.21''80/100/120


Panel Size Saw Blade

Features

1. Table, radial or sliding table saws, such as Striebig, Altendorf, SCMI, Delta, etc. 

2. Choose ATB grind for solid wood or veneer plywood and TC grind for MDF, OSB, HDF and single or double-sided melamine and plastic laminated panels.

3. With longer lasting Ditec 2000™ carbide-tips.


Part NO.OdKerfPlateBoreTeeth
NX12G072C-112''(305mm)3.22.230mm72/80/96
NX14G072C14'(355mm)4.4330mm72/80/96


General Purpose

Features

1. General Purpose Saw Blade. MOREELS's general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams.


Part NO.OdKerfPlateBoreTeeth
M08M040G8-1/2"0.071"0.051"5/8"40T
M10M040G10"0.098"0.071"5/8"40T
M12M044G12"0.11"0.079"1"44T
M16M032G16-5/16"0.134"0.098"1"32T


Combination

Features

1. Cuts plywood,melamine,hard&softwoods.

2. Hardened Steel Body for longer life and sharper cutting edge. 

3. Compatible with 10''12''inch miter saw, slide miter saw, or table saw. 


Part NO.OdKerfPlateBoreTeeth
M10M050C10"0.098"0.071"5/8"50T
M12M060C12"0.118"0.079"1"60T


Finish

Features

1. FAST CUTTING& TRIMMING-TCT saw blade is compatible to use with grinding tools of variours top brands. It is manufactured for fast cutting and trimming softwood and hardwood. 

2. PREMIUM TUNGSTEN CARBIDE-The tungsten carbide tips are weleded one by one to the tips of each blade in a fully automated manufacturing process. 

3. LASER-CUT BODY-Top laser cutting machine make reduce-noise slots. Make sure each blade has its long life.


Part NO.OdKerfPlateBoreTeeth
M04M036A4-3/8"0.055"0.04"2036T
M05M036A5-3/8"0.055"0.044"1036T
M06M040A6-1/2"0.063"0.044"5/8"40T
M07M040A7-1/4"0.063"0.044"5/8"40T
M08M040A8"-8-1/4"0.071"0.051"5/8"40T


Fine Finish

Features

1.MOREELS's Fine Finsh Carbide Circular Saw Blade features new laser-cut stabilizer Vents for precise and clean cuts in a variety of wood materials. 


Part NO.OdKerfPlateBoreTeeth
M08M060X8-1/2"0.071"0.051"5/8"60T
M10M060X10"0.094"0.071"5/8"60T
M12M080X12"0.118"0.087"1"80T
M14M080X14"0.118"0.091"1"84T


Ultra Finish

Features

1.MOREELS's Ultra thin kerf for fast, easy cutting and minmum waste. MOREELS's  blade produces a remarkably clean, chip-free cut that requires little to no sanding. 


Part NO.OdKerfPlateBoreTeeth
M06M060U6-1/2"0.063"0.044"5/8"60T
M07M060U7-1/4"0.063"0.044"5/8"60T
M10M080U10"0.098"0.071"5/8"80T